Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Printer Suddenly Stopping - Display not working
(10-14-2016, 02:59 PM)VallyOrent Wrote:  Hi...i am a new user here. As per my knowledge Rapide Lite 200XL is compatible with Mac, PC and Linux and uses free to own open source software. Rapide Lite 200XL will be built from a block of solid aircraft grade aluminum and feature industry leading technology like an ARM 32 bit control board, a 2.8” LCD touch screen interface and a 214 x 214mm Aluminum Heated Bed.Rapide Lite 200XL is a power house of printer precision with USB connection or stand alone SD Card printing

Hi and welcome!

It is correct that the Rapide Lite 200XL uses the CBD-Chitu controller board and display, which we represent. However as you bought the printer from Rapide, it is the Rapide company that needs to resolve any problem that occurred.

We can however give you some tip to try to resolve the problem (following tip can break any warranty between you and Rapide, do this only if you are sure):
1. Check so the cable between the board and display is fasten correct.
2. Try remove the cable between the Chitu board and the screen and connect it again.

Messages In This Thread
RE: Printer Suddenly Stopping - Display not working - goldenboy - 10-14-2016, 03:49 PM

Forum Jump:

Users browsing this thread: 1 Guest(s)