TB6600 Micro Step Stepper Motor Driver Controller
Previous Next

TB6600 Micro Step Stepper Motor Driver Controller


If you have a question for vendor, please click the "Seller Q&A" tab below.

Shipping estimation

HK Post/DHL Air Delivery-5-8 working days:($26.40)

New product

TB6600 Micro Step Stepper Motor Driver Controller for 3D printing

$17.99

- +

This is a professional two-phase stepper motor driver. Reversible control can be achieved by three DIP switch to select 7
Subdivision control file (1, 2 / A, 2 / B, 4, 8, 16, 32,), by three DIP switches to select 8-speed current control (0.5A
, 1A, 1.5A, 2A, 2.5A, 2.8A, 3. 0A, 3.5A). Suitable for driving 57, 42 type two-phase, four-phase hybrid
stepping motor. To achieve low vibration, low noise, high-speed drive motor effects this is the driver you need.

Original new stepper motor driver chip
※ current generated by DIP switch selection
※ interface with high-speed optocoupler isolation
※ seven kinds of adjustable segments
※ semi-automatic flow to reduce heat
※ large heatsink fear high temperature environment
※ strong anti-frequency interference
※ anti-reverse input voltage protection
※ overheating, over-current short circuit protection

Input voltage DC9-40V
Input current switching power supply is recommended power at 5A
Output current 0.5-4.0A
Maximum power consumption 160W
Fine points 1, 2 / A, 2 / B, 4, 8,16, 32
Temperature Operating temperature -10 ~ 45 ℃; Storage temperature -40 ℃ ~ 70 ℃
Moisture condensation, N/A
Weight 0.2 kg

This Product Ships from China

Reviews (0)

Only registered users can post a new review.

Reviews(total:0) in your selected language.

 Show reviews in my language


There are currently no questions for this product.
Be the first to ask a question.

Seller Info/Map

3DFM Store



Visit Seller Store

Address:
Yin Tian Road No.4, Baoan Zhigu Block E 303
Shenzhen, Guangdong 518000
China


Introduction

3DFM Store is a online store with focus on reselling different 3d printing products. The company (Tradecore Ltd.) are based in Hong Kong but all delivery and operation are from Mainland China unless other stated.
3DFM Store was former named as 3Dfilamenta Store.

Delivery Method

We normally ships with DHL AIR EXPRESS or HK POST for small orders.
HK POST is only available for small orders while DHL AIR EXPRESS is available for all orders. 
You will get the option to choose delivery method at checkout. The system will automatically show you which shipping option is available for you. 

Delivery Time

DHL AIR EXPRESS= 5-8 working days

HK POST= 7-11 working days

Handling time= 1-2 working day.

We will issue a tracking number to you once the package is shipped and you will get email updates about your order status. 

We will deliver your order only once we see payment is received in our bank. If you pay with bank wire, please send us the transaction evidence to shorten the delivery time. 

OBS! Because of Chinese New Year, the store will be closed from Jan 27th to Feb 14th, and will open again on Feb 15th, so in order to guarantee the delivery of your order, please place the order as soon as possible before Jan 27th.

Payment Option

Currentley we only accept payment through bankwire payment to our Hong Kong bank, we do not accept any credit card or PayPal (it is in progress).

Bank wire payment normally takes 2-3 working days for us to receive it.

Our Store:

http://3dfilamenta.com/3dfmstore

Company Adress

Hong Kong Adress:
999077 Office Unit 9B, Amtel Building, 148 Des Voeux road central
All items sold by our store is located in Mainland China

China Adress:
Shenzhen City, Baoan District, Zipcode: 518000 
Adress: Yin Tian Road No.4, Baoan Zhigu Block E 303
CBD Chitu V 3.9 3D Printer Controller Board
$81.90
CBD Chitu V 3.9 3D Printer Controller Board
$81.90

Related Products

$18.00

This Wi-Fi Module add-on for CBD Chitu turns your 3D printer controller board wireless. Send files through Wi-Fi directly to your Chitu board, control and print all wireless. With included software you can now mass print with just one software. App included.

$18.00
In Stock
$6.90

CBD SD Card Reader Slot allows you to replace the build in SD card reader slot on CBD Chitu controller board.

$6.90
In Stock
$6.90

External USB module addon for the CBD-Tech Chitu 3D-printer controller board. This module let you extend the USB connection and place it in a convenient place.

$6.90
In Stock
$3.00

 Thermocouple Type K Temperature Sensor

$3.00
In Stock
$0.09

XH2.54-2P-Pin header. Choose between 2P,3P and 4P.

$0.09
In Stock
$81.90

Popular 3D printer motherboard from CBD-Tech with high speed ARM 32-bit microchip, plug and play, auto stepping, fast speed full color touch screen function and so much more. Additional add-on such as multi Wi-Fi print support, stop, pause and print support, external USB drives, apps, software, apps and so much more.

$81.90
In Stock
$8.00

External SD/SDHC card reader with 65-50 cm cable. Compatible with CBD Chitu controller board.

$8.00
In Stock
$5.00

Screen caps for CBD Chitu. Choose screen cap for 2.8" or 3.5"

$5.00
In Stock
$25.00

This auto power module let your 3D printer equipped with the Chitu board automatically save any prints if power get cut, paus thr print then power off and start printing again anytime. You can also set to automatically shut down the power when the printing process is finished.

$25.00
In Stock
$0.21

XH2.54 cables with double head male plugs. Comes in different sizes and length.

$0.21
In Stock
$10.00

This extra auto power module let your 3D printer equipped with the ChiTu board get extra power in. This module will make your board capable of a maximum current of 25A. 

$10.00
In Stock
$69.00

Popular single extrusion 3D printer motherboard from CBD-Tech with high speed ARM 32-bit microchip, plug and play, auto stepping including fast speed full color touch screen function and so much more. Additional add-on module such as Wi-Fi and Extra Power can be added. 

$69.00
In Stock