09-21-2016, 04:39 AM
Hi,you want to know 5 easy steps to make a 3D model from photos. These steps written below.
1: Capture the object through Digital Photos.
2: Create a 3D Model from Photos by Uploading your images to Autodesk 123D Catch.
3: Then Review and clean up your 3D model.
4: After that Edit your 3D Model and Tap into Your Creative Spark.
5: Then you can Print your 3D Model with i.materialise.
Follow these steps one by one to get 3D Model. Iannone 3D is a New Jersey based Rapid Prototyping and 3D Printing Service provider. Recently I took help from this. Thanks a lot.
1: Capture the object through Digital Photos.
2: Create a 3D Model from Photos by Uploading your images to Autodesk 123D Catch.
3: Then Review and clean up your 3D model.
4: After that Edit your 3D Model and Tap into Your Creative Spark.
5: Then you can Print your 3D Model with i.materialise.
Follow these steps one by one to get 3D Model. Iannone 3D is a New Jersey based Rapid Prototyping and 3D Printing Service provider. Recently I took help from this. Thanks a lot.
![[-]](../../forum/images/collapse.png)
